Tel: +86 755 2335 7706 E-mail: info@hilinktech.com

SEOKeywords

Home >> SEOKeywords

Optical Transceiver Suppliers

Hilink Technology is an optical networking solutions provider. Since 2015, we have been offering optical modules and some related products.

Products List

Optical Transceivers
Passive xWDM
DAC AOC Cables
Optical Solutions

Optical Transceiver Suppliers

Hilink Technology's Small Form Factor Pluggable (SFP) transceiver family of fiber optic transceivers and SFP optical transceivers are available in a variety of types. They offer a rich set of modules in terms of speed, protocol and range to support transmission media. Multiple form factors are supported, including fiber, SFP, SFP+ .

The transmission rate of SFP+ is 10Gbit/s, and the transmission rate of SFP28 is 25Gbit/s.

The transmission rate of SFP+ is 10Gbit/s, and the transmission rate of SFP28 is 25Gbit/s.

View More
The SFP+ direct attach cable connects two SFP+ ports without adding additional optical modules and cables.

The SFP+ direct attach cable connects two SFP+ ports without adding additional optical modules and cables.

View More
Both repeaters and transceivers are functionally similar devices that convert full-duplex electrical signals to full-duplex optical signals.

Both repeaters and transceivers are functionally similar devices that convert full-duplex electrical signals to full-duplex optical signals.

View More
10G SFP+ AOC cables are typically used in end-of-row or mid-row data center architectures with interconnect distances up to 15m.

10G SFP+ AOC cables are typically used in end-of-row or mid-row data center architectures with interconnect distances up to 15m.

View More
SFP+ is an enhanced version of SFP that supports 8Gbit/s Fibre Channel, 10G Ethernet and the optical transmission network standard OTU2.

SFP+ is an enhanced version of SFP that supports 8Gbit/s Fibre Channel, 10G Ethernet and the optical transmission network standard OTU2.

View More
QSFP28 is the abbreviation of Quad Small Form-Factor Pluggable 28.

QSFP28 is the abbreviation of Quad Small Form-Factor Pluggable 28.

View More
The transmission rates and standards of SFP and SFP+ are also different.

The transmission rates and standards of SFP and SFP+ are also different.

View More
Each optical port on the QSFP28 BiDi contains a transmitter and receiver, sending and receiving data to and from interconnected network devices at full-duplex 50Gbps over a single fiber.

Each optical port on the QSFP28 BiDi contains a transmitter and receiver, sending and receiving data to and from interconnected network devices at full-duplex 50Gbps over a single fiber.

View More
If the SFP28 port on the network switch can be set to 10G transmission, the SFP+ module will work well, otherwise the SFP+ module will not work.

If the SFP28 port on the network switch can be set to 10G transmission, the SFP+ module will work well, otherwise the SFP+ module will not work.

View More
If the SFP+ optical module is inserted into the SFP28 port, the link transmission rate is 10Gbit/s.

If the SFP+ optical module is inserted into the SFP28 port, the link transmission rate is 10Gbit/s.

View More
10G SFP+ optics have a smaller footprint than XFP modules, which also enables higher port density.

10G SFP+ optics have a smaller footprint than XFP modules, which also enables higher port density.

View More
The most significant change from QSFP+ and QSFP28 to QSFP56 is that QSFP56 undergoes a change from NRZ encoding to PAM4 encoding.

The most significant change from QSFP+ and QSFP28 to QSFP56 is that QSFP56 undergoes a change from NRZ encoding to PAM4 encoding.

View More
SFP+ cables are high-speed cables with SFP+ connector modules on both ends. It uses a connector to transmit and receive 10Gbps data over a thin duplex or fiber optic cable through a pair of transmitter and receiver.

SFP+ cables are high-speed cables with SFP+ connector modules on both ends. It uses a connector to transmit and receive 10Gbps data over a thin duplex or fiber optic cable through a pair of transmitter and receiver.

View More
SFP28 ER -

SFP28 ER - "ER" means Extended Range. Used in conjunction with OS2 single-mode fiber, it can achieve up to 40km transmission.

View More
SFP28 direct attach copper cable has higher bandwidth and lower loss than SFP+ direct attach copper cable.

SFP28 direct attach copper cable has higher bandwidth and lower loss than SFP+ direct attach copper cable.

View More
When using a QSFP56 module in a QSFP56-DD port, the port will be configured for a data rate of 200G instead of 400G.

When using a QSFP56 module in a QSFP56-DD port, the port will be configured for a data rate of 200G instead of 400G.

View More
Get in Touch

Related Information

Transceiver Module PriceOptical Transceiver PriceSFP Module PriceSFP Cost100g QSFP28 Active Optical CableCWDM SFP CostSFP 80KM Price100G SFP PriceSFP Module 10g Price40g SFP PriceFiber Gbic Module SupplierOptical Transceiver SuppliersSFP Transceiver Price10G SFP PriceSFP+ 40km PriceQSFP PriceSFP Connector PriceSFP Optical Transceiver SupplierEDFA PriceQSFP28 LR4 PriceSFP Module CostFiber Optical SwitchSFP 10g 80km PricePrice of SFP ModuleSFP+ PriceSFP Transceiver ManufacturersFiber Optic Transceiver ManufacturersQSFP28 Price10G SFP Module PriceSFP 20km Price1G SFP Module PriceOptical Transceiver ManufacturerSFP Transceiver ManufacturerSFP SupplierSFP for Sale