Tel: +86 755 2335 7706 E-mail: info@hilinktech.com

SEOKeywords

Home >> SEOKeywords

Optical Transceiver Price

What is an optic transceiver?

An optical transceiver is a small yet powerful device that can both transmit and receive data. In fiber optics, this data is sent in the form of pulses of light over an optical fiber, at very high speeds and across long distances.


Products List

Optical Transceivers
Passive xWDM
DAC AOC Cables
Optical Solutions

Optical Transceiver Price

How do I choose an optical transceiver?

The eight key considerations for your network's transceivers are:

1. Form factor & connectors.

2. Original equipment manufacturer (OEM) compatibility.

3. Speed/data rate.

4. Media.

5. Type.

6. Wavelength.

7. Reach.

8. Environment.

The QSFP56 form factor has higher network speeds because the 200G QSFP supports 4x50G lanes.

The QSFP56 form factor has higher network speeds because the 200G QSFP supports 4x50G lanes.

View More
10GBASE-LR fiber optic transceivers, LR stands for

10GBASE-LR fiber optic transceivers, LR stands for "Long Range", operating at a nominal wavelength of 1310nm, up to 10 kilometers over single-mode fiber.

View More
10GBASE-ZR transceivers can also operate at the nominal wavelength of 1550 nm and work with SMF, but with a longer range of 80 km.

10GBASE-ZR transceivers can also operate at the nominal wavelength of 1550 nm and work with SMF, but with a longer range of 80 km.

View More
In actual construction and deployment, using 10G SFP+ cables is more flexible and less difficult.

In actual construction and deployment, using 10G SFP+ cables is more flexible and less difficult.

View More
QSFP56 means 4 x 50 to 56Gb/s in the QSFP form factor. For simplicity, it is also sometimes referred to as 200G QSFP.

QSFP56 means 4 x 50 to 56Gb/s in the QSFP form factor. For simplicity, it is also sometimes referred to as 200G QSFP.

View More
400G QSFP-DD, the

400G QSFP-DD, the "DD" here refers to double density, that is to say, the number of channels of 400G QSFP-DD has changed from 4 to 8, and the transmission rate of 400G can be achieved.

View More
10G SFP+ AOC cables are typically used in end-of-row or mid-row data center architectures with interconnect distances up to 15m.

10G SFP+ AOC cables are typically used in end-of-row or mid-row data center architectures with interconnect distances up to 15m.

View More
The QSFP28 specification has only 4 electrical channels, which is not enough to support a 10-channel 10G electrical interface.

The QSFP28 specification has only 4 electrical channels, which is not enough to support a 10-channel 10G electrical interface.

View More
10G XFP and SFP+ transceivers are compatible with each other in an Ethernet network, provided their protocols agree and conform to the same wavelength and signaling rate.

10G XFP and SFP+ transceivers are compatible with each other in an Ethernet network, provided their protocols agree and conform to the same wavelength and signaling rate.

View More
The 10GBASE-SR optical transceiver is one of the most commonly used modules for 10GbE. SR stands for short distance, and the transmission distance of 10GBASE-SR modules matched with OM3 multimode fiber (MMF) can reach 300 meters.

The 10GBASE-SR optical transceiver is one of the most commonly used modules for 10GbE. SR stands for short distance, and the transmission distance of 10GBASE-SR modules matched with OM3 multimode fiber (MMF) can reach 300 meters.

View More
SFP transmits up to 4Gbit/s, and SFP+ can transmit up to 10Gbit/s; SFP is based on the SFF-8472 protocol, while SFP+ is based on the SFF-8431 and SFF-8432 protocols.

SFP transmits up to 4Gbit/s, and SFP+ can transmit up to 10Gbit/s; SFP is based on the SFF-8472 protocol, while SFP+ is based on the SFF-8431 and SFF-8432 protocols.

View More
10G AOCs use fiber optic cables and silicon chips, and provide electro-optical connections to enhance the cable's signal and performance.

10G AOCs use fiber optic cables and silicon chips, and provide electro-optical connections to enhance the cable's signal and performance.

View More
They use the same form factor, and the pinouts of the SFP28 and SFP+ connectors are compatible.

They use the same form factor, and the pinouts of the SFP28 and SFP+ connectors are compatible.

View More
The 100G QSFP28 utilizes four lanes of high-speed differential signaling with data rates ranging from 25Gbps to potentially 40Gbps and is designed for 100 Gigabit Ethernet, EDR InfiniBand and 32G Fibre Channel.

The 100G QSFP28 utilizes four lanes of high-speed differential signaling with data rates ranging from 25Gbps to potentially 40Gbps and is designed for 100 Gigabit Ethernet, EDR InfiniBand and 32G Fibre Channel.

View More
A QSFP 100G can only support 4x 10G or 4x 25G electrical interface, can be used as 4x 10GbE or 4x 25GbE, but cannot be used as 10x 10GbE.

A QSFP 100G can only support 4x 10G or 4x 25G electrical interface, can be used as 4x 10GbE or 4x 25GbE, but cannot be used as 10x 10GbE.

View More
QSFP28 is the abbreviation of Quad Small Form-Factor Pluggable 28.

QSFP28 is the abbreviation of Quad Small Form-Factor Pluggable 28.

View More
Get in Touch

Related Information

100g QSFP28 Active Optical CableSFP CostFiber Optical SwitchSFP 10g 80km PriceSFP Optical Transceiver SupplierQSFP28 LR4 Price1G SFP Module PriceFiber Optic Transceiver ManufacturersTransceiver Module PriceSFP Module PriceOptical Transceiver ManufacturerFiber Gbic Module SupplierSFP Connector Price40g SFP PriceSFP for SaleSFP Transceiver PriceSFP Module 10g PriceQSFP PriceSFP 80KM PriceSFP Transceiver Manufacturer10G SFP Module Price10G SFP PriceSFP 20km PriceOptical Transceiver PriceQSFP28 PriceSFP Module CostSFP+ PriceEDFA Price100G SFP PriceSFP Transceiver ManufacturersPrice of SFP ModuleCWDM SFP CostSFP SupplierOptical Transceiver SuppliersSFP+ 40km Price