Tel: +86 755 2335 7706 E-mail: info@hilinktech.com

SEOKeywords

Home >> SEOKeywords

Transceiver Module Price

Products List

Optical Transceivers
Passive xWDM
DAC AOC Cables
Optical Solutions

Transceiver Module Price

SFP28 supports only one 25 Gbit/s channel, while QSFP28 supports 4 independent channels, each at 25 Gbit/s.

SFP28 supports only one 25 Gbit/s channel, while QSFP28 supports 4 independent channels, each at 25 Gbit/s.

View More
400G QSFP-DD, the

400G QSFP-DD, the "DD" here refers to double density, that is to say, the number of channels of 400G QSFP-DD has changed from 4 to 8, and the transmission rate of 400G can be achieved.

View More
The MTP to 4x LC breakout cable consists of an 8-pin MTP connector for 40G QSFP+ on one end and 4 duplex LC connectors for 10G SFP+ on the other end.

The MTP to 4x LC breakout cable consists of an 8-pin MTP connector for 40G QSFP+ on one end and 4 duplex LC connectors for 10G SFP+ on the other end.

View More
10G SFP+ optics have a smaller footprint than XFP modules, which also enables higher port density.

10G SFP+ optics have a smaller footprint than XFP modules, which also enables higher port density.

View More
SFP+ cables are high-speed cables with SFP+ connector modules on both ends. It uses a connector to transmit and receive 10Gbps data over a thin duplex or fiber optic cable through a pair of transmitter and receiver.

SFP+ cables are high-speed cables with SFP+ connector modules on both ends. It uses a connector to transmit and receive 10Gbps data over a thin duplex or fiber optic cable through a pair of transmitter and receiver.

View More
QSFP28 was born to meet the needs of 100G applications. There are a total of 4 high-speed differential signal channels, and the transmission rate of each channel ranges from 25Gbps to a possible 40Gbps.

QSFP28 was born to meet the needs of 100G applications. There are a total of 4 high-speed differential signal channels, and the transmission rate of each channel ranges from 25Gbps to a possible 40Gbps.

View More
Note that SFP+ modules cannot be used in SFP slots, otherwise the port or module may be damaged.

Note that SFP+ modules cannot be used in SFP slots, otherwise the port or module may be damaged.

View More
In actual construction and deployment, using 10G SFP+ cables is more flexible and less difficult.

In actual construction and deployment, using 10G SFP+ cables is more flexible and less difficult.

View More
10GBASE-LR fiber optic transceivers, LR stands for

10GBASE-LR fiber optic transceivers, LR stands for "Long Range", operating at a nominal wavelength of 1310nm, up to 10 kilometers over single-mode fiber.

View More
10G AOCs use fiber optic cables and silicon chips, and provide electro-optical connections to enhance the cable's signal and performance.

10G AOCs use fiber optic cables and silicon chips, and provide electro-optical connections to enhance the cable's signal and performance.

View More
The transmission rates and standards of SFP and SFP+ are also different.

The transmission rates and standards of SFP and SFP+ are also different.

View More
QSFP28 BiDi modules are high-quality solutions for datacom and interconnect applications with the lowest infrastructure cost.

QSFP28 BiDi modules are high-quality solutions for datacom and interconnect applications with the lowest infrastructure cost.

View More
The 25G SFP28 LWDM transceiver, as a low-cost solution in 25G WDM transceivers, uses a relatively inexpensive DML laser to maintain stable transmission.

The 25G SFP28 LWDM transceiver, as a low-cost solution in 25G WDM transceivers, uses a relatively inexpensive DML laser to maintain stable transmission.

View More
Both repeaters and transceivers are functionally similar devices that convert full-duplex electrical signals to full-duplex optical signals.

Both repeaters and transceivers are functionally similar devices that convert full-duplex electrical signals to full-duplex optical signals.

View More
A simple 100G to 4x 25G breakout connection can be made between one QSFP28 SR4 transceiver and four SFP28 transceivers with breakout cables.

A simple 100G to 4x 25G breakout connection can be made between one QSFP28 SR4 transceiver and four SFP28 transceivers with breakout cables.

View More
SFP28 provides an efficient solution for 10G-25G-100G network upgrades to meet the continued growth of next-generation data center networks.

SFP28 provides an efficient solution for 10G-25G-100G network upgrades to meet the continued growth of next-generation data center networks.

View More
Get in Touch

Related Information

SFP 20km PriceSFP Module 10g PriceOptical Transceiver PriceSFP Connector Price10G SFP PriceQSFP PriceOptical Transceiver ManufacturerSFP Transceiver Manufacturers40g SFP Price1G SFP Module PriceSFP 80KM PriceQSFP28 LR4 Price100g QSFP28 Active Optical CableSFP SupplierEDFA PriceFiber Optical SwitchSFP+ Price100G SFP PriceSFP Optical Transceiver SupplierSFP 10g 80km PriceTransceiver Module PriceSFP Transceiver ManufacturerSFP CostPrice of SFP ModuleOptical Transceiver SuppliersSFP Module PriceSFP for SaleFiber Optic Transceiver Manufacturers10G SFP Module PriceQSFP28 PriceCWDM SFP CostSFP Transceiver PriceFiber Gbic Module SupplierSFP Module CostSFP+ 40km Price
kf kf kf