Tel: +86 755 2335 7706 E-mail: info@hilinktech.com

SEOKeywords

Home >> SEOKeywords

Fiber Optic Transceiver Manufacturers

Hilink Technology optical transceivers are products that support the insertion and removal of fiber optic connectors - for applications that require flexibility in terms of users, cable types and link distances.

Products List

Optical Transceivers
Passive xWDM
DAC AOC Cables
Optical Solutions

Fiber Optic Transceiver Manufacturers

A transceiver is an important part of a fiber optic network for converting electrical signals to optical (light) signals and converting optical signals to electrical signals. It can be inserted or embedded in another device in the data network that can send and receive signals.

The data transfer rate of SFP varies from 100Mbps to 4Gbps.

The data transfer rate of SFP varies from 100Mbps to 4Gbps.

View More
SFP modules replace GBIC modules in most applications due to their small size, allowing them to be used in tight network spaces.

SFP modules replace GBIC modules in most applications due to their small size, allowing them to be used in tight network spaces.

View More
SFP can be understood as an upgraded version of GBIC. Its volume is only 1/2 of the GBIC module, which greatly increases the port density of network equipment.

SFP can be understood as an upgraded version of GBIC. Its volume is only 1/2 of the GBIC module, which greatly increases the port density of network equipment.

View More
10G/40G ports are still available. Not all networks need to operate as fast as possible, the Ethernet Alliance said.

10G/40G ports are still available. Not all networks need to operate as fast as possible, the Ethernet Alliance said.

View More
QSFP+ supports 4×10Gbit/s channel transmission, and can achieve 40Gbps transmission rate through 4 channels.

QSFP+ supports 4×10Gbit/s channel transmission, and can achieve 40Gbps transmission rate through 4 channels.

View More
SFP+ fibers cannot be inserted into SFP ports because SFP+ does not support speeds below 1G.

SFP+ fibers cannot be inserted into SFP ports because SFP+ does not support speeds below 1G.

View More
Each optical port on the QSFP28 BiDi contains a transmitter and receiver, sending and receiving data to and from interconnected network devices at full-duplex 50Gbps over a single fiber.

Each optical port on the QSFP28 BiDi contains a transmitter and receiver, sending and receiving data to and from interconnected network devices at full-duplex 50Gbps over a single fiber.

View More
10G XFP and SFP+ transceivers are compatible with each other in an Ethernet network, provided their protocols agree and conform to the same wavelength and signaling rate.

10G XFP and SFP+ transceivers are compatible with each other in an Ethernet network, provided their protocols agree and conform to the same wavelength and signaling rate.

View More
The MTP to 4x LC breakout cable consists of an 8-pin MTP connector for 40G QSFP+ on one end and 4 duplex LC connectors for 10G SFP+ on the other end.

The MTP to 4x LC breakout cable consists of an 8-pin MTP connector for 40G QSFP+ on one end and 4 duplex LC connectors for 10G SFP+ on the other end.

View More
200G QSFP56 optical module and 200G QSFP-DD optical module are two mainstream solutions for 200G optical interconnection.

200G QSFP56 optical module and 200G QSFP-DD optical module are two mainstream solutions for 200G optical interconnection.

View More
There are many types of SFP modules according to different classification standards. It can be used for copper or fiber optic cables.

There are many types of SFP modules according to different classification standards. It can be used for copper or fiber optic cables.

View More
10G SFP+ AOC cable assemblies are high-performance and cost-effective I/O solutions for 10G Ethernet and 10G Fibre Channel applications.

10G SFP+ AOC cable assemblies are high-performance and cost-effective I/O solutions for 10G Ethernet and 10G Fibre Channel applications.

View More
400G QSFP-DD, the

400G QSFP-DD, the "DD" here refers to double density, that is to say, the number of channels of 400G QSFP-DD has changed from 4 to 8, and the transmission rate of 400G can be achieved.

View More
The size of the 400G QSFP-DD optical module is very similar to the size of the 200G QSFP56 optical module.

The size of the 400G QSFP-DD optical module is very similar to the size of the 200G QSFP56 optical module.

View More
SFP+ cables are high-speed cables with SFP+ connector modules on both ends. It uses a connector to transmit and receive 10Gbps data over a thin duplex or fiber optic cable through a pair of transmitter and receiver.

SFP+ cables are high-speed cables with SFP+ connector modules on both ends. It uses a connector to transmit and receive 10Gbps data over a thin duplex or fiber optic cable through a pair of transmitter and receiver.

View More
On the fiber optic side, there are single-mode SFP modules and multi-mode SFP modules, allowing users to select the right transceiver based on the optical range required for their network.

On the fiber optic side, there are single-mode SFP modules and multi-mode SFP modules, allowing users to select the right transceiver based on the optical range required for their network.

View More
Get in Touch

Related Information

SFP 10g 80km Price1G SFP Module PriceEDFA Price100G SFP PriceFiber Optical Switch40g SFP PriceFiber Optic Transceiver ManufacturersSFP 20km PriceSFP CostSFP 80KM PriceSFP+ PriceSFP Transceiver Manufacturer10G SFP PriceTransceiver Module PriceSFP Transceiver ManufacturersSFP SupplierCWDM SFP CostQSFP28 LR4 PriceSFP Module CostSFP Module PriceSFP Optical Transceiver SupplierSFP Transceiver PriceQSFP PriceQSFP28 PriceSFP+ 40km PriceFiber Gbic Module SupplierOptical Transceiver ManufacturerPrice of SFP ModuleOptical Transceiver Price100g QSFP28 Active Optical Cable10G SFP Module PriceSFP Module 10g PriceSFP for SaleOptical Transceiver SuppliersSFP Connector Price