Tel: +86 755 2335 7706 E-mail: info@hilinktech.com

SEOKeywords

Home >> SEOKeywords

SFP Cost

Products List

Optical Transceivers
Passive xWDM
DAC AOC Cables
Optical Solutions

SFP Cost

SFP28 is an enhanced version of SFP+ and has the same size as SFP+, but it can support a single-channel 25Gb/s rate.

SFP28 is an enhanced version of SFP+ and has the same size as SFP+, but it can support a single-channel 25Gb/s rate.

View More
The QSFP28 specification has only 4 electrical channels, which is not enough to support a 10-channel 10G electrical interface.

The QSFP28 specification has only 4 electrical channels, which is not enough to support a 10-channel 10G electrical interface.

View More
QSFP+ is an upgraded version of QSFP. QSFP can support 4 channels of transmission at the same time, and the data rate of each channel is 1Gbit/s, but QSFP+ is different from QSFP.

QSFP+ is an upgraded version of QSFP. QSFP can support 4 channels of transmission at the same time, and the data rate of each channel is 1Gbit/s, but QSFP+ is different from QSFP.

View More
The transmission rates and standards of SFP and SFP+ are also different.

The transmission rates and standards of SFP and SFP+ are also different.

View More
The MTP to 4x LC breakout cable consists of an 8-pin MTP connector for 40G QSFP+ on one end and 4 duplex LC connectors for 10G SFP+ on the other end.

The MTP to 4x LC breakout cable consists of an 8-pin MTP connector for 40G QSFP+ on one end and 4 duplex LC connectors for 10G SFP+ on the other end.

View More
When using a QSFP56 module in a QSFP56-DD port, the port will be configured for a data rate of 200G instead of 400G.

When using a QSFP56 module in a QSFP56-DD port, the port will be configured for a data rate of 200G instead of 400G.

View More
SFP+ transceivers implement more circuitry on the motherboard rather than internally - it offloads some functions onto the motherboard, including signal modulation functions, MAC, CDR and EDC.

SFP+ transceivers implement more circuitry on the motherboard rather than internally - it offloads some functions onto the motherboard, including signal modulation functions, MAC, CDR and EDC.

View More
The QSFP-100/112G dual-rate transceivers are designed for low-power 100GBASE Ethernet and 4x28G OTN client interfaces, ideal for telecom and 5G wireless networking applications.

The QSFP-100/112G dual-rate transceivers are designed for low-power 100GBASE Ethernet and 4x28G OTN client interfaces, ideal for telecom and 5G wireless networking applications.

View More
There are many types of QSFP28 products, and the ways to achieve 100G transmission are different, such as 100G direct connection, 100G to 4-way 25G branch link, or 100G to 2-way 50G branch link.

There are many types of QSFP28 products, and the ways to achieve 100G transmission are different, such as 100G direct connection, 100G to 4-way 25G branch link, or 100G to 2-way 50G branch link.

View More
QSFP+ and QSFP28 optical modules have the same size and have 4 integrated transmit and receive channels.

QSFP+ and QSFP28 optical modules have the same size and have 4 integrated transmit and receive channels.

View More
On the fiber optic side, there are single-mode SFP modules and multi-mode SFP modules, allowing users to select the right transceiver based on the optical range required for their network.

On the fiber optic side, there are single-mode SFP modules and multi-mode SFP modules, allowing users to select the right transceiver based on the optical range required for their network.

View More
SFP28 LR -

SFP28 LR - "LR" means Remote. It mainly cooperates with OS2 single-mode fiber for long-distance transmission (up to 10km).

View More
10GBASE-ZR transceivers can also operate at the nominal wavelength of 1550 nm and work with SMF, but with a longer range of 80 km.

10GBASE-ZR transceivers can also operate at the nominal wavelength of 1550 nm and work with SMF, but with a longer range of 80 km.

View More
A QSFP 100G can only support 4x 10G or 4x 25G electrical interface, can be used as 4x 10GbE or 4x 25GbE, but cannot be used as 10x 10GbE.

A QSFP 100G can only support 4x 10G or 4x 25G electrical interface, can be used as 4x 10GbE or 4x 25GbE, but cannot be used as 10x 10GbE.

View More
400G QSFP-DD, the

400G QSFP-DD, the "DD" here refers to double density, that is to say, the number of channels of 400G QSFP-DD has changed from 4 to 8, and the transmission rate of 400G can be achieved.

View More
SFP and SFP+ modules are identical in size and appearance, so equipment manufacturers can adopt SFP physical designs on switches with SFP+ ports.

SFP and SFP+ modules are identical in size and appearance, so equipment manufacturers can adopt SFP physical designs on switches with SFP+ ports.

View More
Get in Touch

Related Information

Transceiver Module Price100g QSFP28 Active Optical CableSFP Module Price100G SFP PriceFiber Optical SwitchQSFP28 LR4 Price10G SFP Module PriceSFP for SaleQSFP PriceSFP+ 40km PriceSFP SupplierSFP 20km Price10G SFP PriceOptical Transceiver Price40g SFP PriceSFP Optical Transceiver Supplier1G SFP Module PriceSFP Transceiver ManufacturersFiber Optic Transceiver ManufacturersSFP 80KM PriceCWDM SFP CostSFP Module 10g PriceSFP CostSFP Transceiver PriceSFP Transceiver ManufacturerSFP Module CostEDFA PriceFiber Gbic Module SupplierOptical Transceiver ManufacturerSFP Connector PriceOptical Transceiver SuppliersPrice of SFP ModuleQSFP28 PriceSFP 10g 80km PriceSFP+ Price
kf kf kf