Tel: +86 755 2335 7706 E-mail: info@hilinktech.com

SEOKeywords

Home >> SEOKeywords

100G SFP Price

Products List

Optical Transceivers
Passive xWDM
DAC AOC Cables
Optical Solutions

100G SFP Price

The transmission rate of SFP+ is 10Gbit/s, and the transmission rate of SFP28 is 25Gbit/s.

The transmission rate of SFP+ is 10Gbit/s, and the transmission rate of SFP28 is 25Gbit/s.

View More
SFP28 and QSFP28 transceivers actually use different sizes and operating principles.

SFP28 and QSFP28 transceivers actually use different sizes and operating principles.

View More
QSFP28 was born to meet the needs of 100G applications. There are a total of 4 high-speed differential signal channels, and the transmission rate of each channel ranges from 25Gbps to a possible 40Gbps.

QSFP28 was born to meet the needs of 100G applications. There are a total of 4 high-speed differential signal channels, and the transmission rate of each channel ranges from 25Gbps to a possible 40Gbps.

View More
Each optical port on the QSFP28 BiDi contains a transmitter and receiver, sending and receiving data to and from interconnected network devices at full-duplex 50Gbps over a single fiber.

Each optical port on the QSFP28 BiDi contains a transmitter and receiver, sending and receiving data to and from interconnected network devices at full-duplex 50Gbps over a single fiber.

View More
100G QSFP28 interfaces are not interoperable with SR10 based 100GbE transceivers.

100G QSFP28 interfaces are not interoperable with SR10 based 100GbE transceivers.

View More
If the SFP28 port on the network switch can be set to 10G transmission, the SFP+ module will work well, otherwise the SFP+ module will not work.

If the SFP28 port on the network switch can be set to 10G transmission, the SFP+ module will work well, otherwise the SFP+ module will not work.

View More
10GBASE-LR fiber optic transceivers, LR stands for

10GBASE-LR fiber optic transceivers, LR stands for "Long Range", operating at a nominal wavelength of 1310nm, up to 10 kilometers over single-mode fiber.

View More
The QSFP28 specification has only 4 electrical channels, which is not enough to support a 10-channel 10G electrical interface.

The QSFP28 specification has only 4 electrical channels, which is not enough to support a 10-channel 10G electrical interface.

View More
SFP and SFP+ are the same size, but differ in speed and compatibility. Unlike XFP and SFP+ modules for 10GbE applications, SFPs are used for 100BASE or 1000BASE applications.

SFP and SFP+ are the same size, but differ in speed and compatibility. Unlike XFP and SFP+ modules for 10GbE applications, SFPs are used for 100BASE or 1000BASE applications.

View More
SFP+ is an enhanced version of SFP that supports 8Gbit/s Fibre Channel, 10G Ethernet and the optical transmission network standard OTU2.

SFP+ is an enhanced version of SFP that supports 8Gbit/s Fibre Channel, 10G Ethernet and the optical transmission network standard OTU2.

View More
10G AOC is a fusion of optics and electronics or active electronic components that require an external power supply to complete the signal conversion.

10G AOC is a fusion of optics and electronics or active electronic components that require an external power supply to complete the signal conversion.

View More
SFP can be understood as an upgraded version of GBIC. Its volume is only 1/2 of the GBIC module, which greatly increases the port density of network equipment.

SFP can be understood as an upgraded version of GBIC. Its volume is only 1/2 of the GBIC module, which greatly increases the port density of network equipment.

View More
10G SFP+ DACs are typically used for ToR (Top of Rack) interconnects between 10G ToR switches and servers or stacking of 10GbE switches.

10G SFP+ DACs are typically used for ToR (Top of Rack) interconnects between 10G ToR switches and servers or stacking of 10GbE switches.

View More
And the SFP+ transceiver cannot be inserted into the SFP port, otherwise the product or the port may be damaged. Generally, SFP+ is more expensive than SFP.

And the SFP+ transceiver cannot be inserted into the SFP port, otherwise the product or the port may be damaged. Generally, SFP+ is more expensive than SFP.

View More
10GBASE-ZR transceivers can also operate at the nominal wavelength of 1550 nm and work with SMF, but with a longer range of 80 km.

10GBASE-ZR transceivers can also operate at the nominal wavelength of 1550 nm and work with SMF, but with a longer range of 80 km.

View More
If the SFP+ optical module is inserted into the SFP28 port, the link transmission rate is 10Gbit/s.

If the SFP+ optical module is inserted into the SFP28 port, the link transmission rate is 10Gbit/s.

View More
Get in Touch

Related Information

SFP Transceiver PriceCWDM SFP Cost40g SFP PriceFiber Gbic Module SupplierSFP Module PriceFiber Optic Transceiver ManufacturersSFP 80KM PriceQSFP28 Price100g QSFP28 Active Optical CableFiber Optical SwitchEDFA Price10G SFP PriceSFP for SalePrice of SFP ModuleSFP Supplier100G SFP Price1G SFP Module PriceTransceiver Module PriceSFP Transceiver ManufacturerQSFP PriceSFP+ PriceOptical Transceiver ManufacturerSFP Module 10g PriceSFP Cost10G SFP Module PriceSFP 10g 80km PriceQSFP28 LR4 PriceSFP Connector PriceOptical Transceiver SuppliersSFP Optical Transceiver SupplierSFP 20km PriceSFP+ 40km PriceSFP Module CostSFP Transceiver ManufacturersOptical Transceiver Price